Looking for a Fritzing part for the Waytronic WT588D audio module? The actual file, with source SVG files, in ZIP format: WT588D-16P fritzing part. To see it in use: Programming the WT588D sound module, Part 3 – Three-line serial mode. Programming the WT588D sound module, Part 4 – One-line serial mode.
- Tag: WT588D audio module
Posts tagged WT588D audio module
So, since we had gotten the WT588D sound module working in three-line serial mode, it was time to see if we could do the same for the supposedly more difficult single-line serial mode. Turns out, we can. Schematic: Below, the wiring for my most basic implementation, with the Digistump Oak as microcontroller. The Oak’s VCC pin provides […]
continued from Programming the WT588D sound module, Part 2 – flash your module, wire it up. Here, the wiring diagram for WT588D sound module controlled by a microprocessor, in three-line serial mode: Note that the BUSY pin is not wired back to the microcontroller, but that activity on the sound module activates an external LED. Alternately, you […]
continued from Programming the WT588D sound module, Part 1. You’re now ready to upload your audio files to the WT588D sound module. Grab your programmer module; connect it to your computer via USB. Orient it so the USB connector is up. Take the locking lever and swing it into vertical position. Locate the notch on the […]
Need to add sound to your project? Voice prompts? Sound effects in games? Robots that bleep or boop or scream? Talking alarm systems? The WT588D, a so-called ‘voice chip’, allows you to add custom sound clips in the form of WAV files to your project, and is available for a few dollars on eBay. Drive a […]